Tag: Equipment

TV Location

Posted on by Lauren

– Do not plan in advance the location of the tv. Let the architects and builders to do it yourself. After the housewarming party you can always pull up the antenna cable to a convenient place for you on the floor. – Have the wiring for Television ordinary electrician. Connecting the outlet consistently, it will cost less than cable length.

The inevitable loss of signal can always be compensated by an expensive amplifier later. And the satellite channels is often boring. – Buy cables for television manufacturers questionable construction markets. You can always convince themselves that those channels whose frequency does not pass through a cable, you are not interested.. – After repairs, install a satellite antenna can always be neatly put television cables on the edge of the room. – Do not plan a separate low-current shield for television.

In one corner there is always an electric place. Not so strong noise you see on the screen. – Place the tv splitters out of the reach of service locations. It's not often they go wrong, and the next repair can always be changed. – Never run a cable to a place install a satellite receiver. Why do you need to watch satellite channels in other parts of your home? – Be sure to connect the screen of television cables to ground>> in an electric shield. Then, after repairs, you will be guaranteed check the rcd to operate at every turn on the tv.

ESKD Equipment

Posted on by Lauren

Company "Yaroslavl factory tooling" (YAZTO) specializes in the manufacture of tooling for cold stamping, mold, non-standard equipment and various accessories. High-quality equipment – it is a success and efficiency. Achieving this is possible with the equipment of our production. The enterprise produced over 15,000 stamps of varying degrees of complexity – and the combined sequential actions (punching, perforating, punching, bending, zavivochnye, exhaust, molding, assembly, straightening, cut, cutting, calibrating, otbortovochnye, PFA). Produced production mold of one-and multi, storey, for rubber, plastic mold and non-ferrous alloys under pressure. The specialists of our design department has accumulated vast experience in designing industrial equipment. According to your drawings, sketches, samples of products, designers will make a list of necessary equipment, will construct a mathematical model of product design documentation in accordance with its mandatory ESKD subsequent coordination with the customer.

Stamps are made as production testing equipment of our company and the customer's equipment. The most important parts of dies and molds for manufacture of processed at the modern high-precision machine tools with numerical control. Park equipment consists of CNC machining centers from GF2171S5, GF2171S (1000 400 100 mm), 4-axis VMC 1050A (1050 640 500mm), 3 +2 axis DMU 50 T, DMU 60 T (o 700 500 500 mm, chuck 700 mm), 5-axis DMU 50eVo (shop tools 600, 500 400 400 mm, globusny table, chuck 500 mm). Programs for CNC machines are created on the basis of design documentation, or directly from a mathematical model. .