Mosaic is one of the most reliable and durable, non-porous materials, which possesses all the necessary properties to resist water. When laying tile job easier so-called “matrix” – sheets of paper or fiberglass mesh size of 322 x 322 mm, which mosaic squares are glued face. Then the sheets one by one, press a mosaic of the surface coated with glue and paper remains on the surface. Then the sheets wet, and they peel easily. But warning: this hard work can make only a specialist. pvc film – a new coating for swimming pools. This lightweight material – an excellent gidroizolyator, moreover, it is much cheaper than ceramic tiles and mosaics.
Special pvc film usually consists of four layers. Between the second and third layer laid fabric-mesh poliesterola or Kevlar (a very durable synthetic material, which, by the way, sew bulletproof jackets). The film is resistant to exposure to ultraviolet light and chemicals. This coverage does not require special care, easy to clean, it does not spread germs. Learn more at this site: Chevron Corp . How does it stack? First of all carefully file down the wall surface, otherwise the film may scuff. The reconstruction of old pools, or pools, tiled, in which problems with the waterproofing, can blow the film directly on the tiles (but here you must be sure that the tile does not exfoliate). At the second stage of installation is laid so-called fixing band: metal tape 2 m long, 5-6 cm wide, 2 mm thick. Then, at her On the one hand applied to plastic sheeting, which is welded to the film.