Water-repellent Agent

Water-repellent agent Monolith Hydro – for stucco plaster, water-based water-repellent agent. If you are unsure how to proceed, check out Michael Schwartz. He used to give water repellency properties of gypsum products. The composition is ready for use at its base includes silicones sopolimery.Gidrofobizator does not contain organic solvents, toxic, odorless, safe for humans and the environment. Water-repellent agent is approved for exterior and interior work in the repair and construction of industrial buildings, residential buildings. Purpose Hydro hydrophobizator Monolith most diverse for example: giving water resistance to products made from plaster, facing tile, drywall sheets, gypsum particle board, small architectural forms, internal, and most importantly outdoor decoration. Water-repellent agent penetrates deeply into a plaster surface. Increased hardiness and durability of molding plaster. Also a significant reduction in winter ice, surfaced stucco and plaster to clean the ice much easier.

No surface film is formed, does not change the texture of the surface. The risk moldy. Persists breathability, thermal insulation. I highly recommend you to my dear friends, before you start to handle the decorative surface products hydrophobizator, try to small section of stucco plaster, in order to determine the absence of color change. Dosing!! Applied to a dry and clean surface by brush, roller-paint can in 1 – 2 layers 'wet-on-wet' to saturation temperature (10 -25) C. Be careful! DO NOT allow the formation of puddles on the surface of the water repelling agent and should not be applied to the already dried layer. Drying approximately one hour at an average temperature of + 20 C.

Do not getting on the glazed surface. Full hydrophobization come a day – all this time to protect the surface from water and sediment. The composition of fire-safe. But still it is alkaline, therefore, to carry out works strictly observing safety precautions when working with alkali at pH 13-14. Be sure clothing. Protective goggles and rubber perchatki.Esli water-repellent agent has got into your eyes, rinse immediately with water!! Consumption is obtained by a 0.1-0.5 l / m? why such acceleration, because the surface of different porous or rough. Removed removed removed removed Be bold with Respect Yours The Blog